Power - Solar System
TP-Link VIGI SP6030 Solar Power Supply System
- Brand
- TP-Link
- Model
- SP6030
- Part number
- VIGI-SP6030
- Availability
- Ordered on demand
Type
This choice changes the specification and cannot be changed after ordering. Tell us which you need when you enquire.
Specifications
| Panel | 60W Monocrystalline Photovoltaic |
|---|---|
| Battery | 31.2Ah / 10.8V Lithium |
| Outputs | 3x DC Voltage Ports (9V/12V) |
| Protection | IP66 Weatherproof, Intelligent Heating |
What this is for
An off-grid power station for cameras on sites with no mains supply: a 60 watt solar panel charging a 31.2Ah lithium battery, with three DC outputs and an RJ45 pass-through, rated IP66 for outdoor mounting.
The runtime figure needs reading carefully, because it depends entirely on the load. TP-Link publish 7.3 days of operation through consecutive rainy days when it is powering a 4G camera, and 2.3 days when it is powering a wireless bridge plus a bullet camera. Both are calculated on 3.72 hours of average daily sunshine, which is a New York figure. Nairobi does considerably better than that, but what you connect is what decides whether you get seven days or two.
Outputs run 9 to 12.6 volts at 2 amps, which suits the 12V DC cameras in the range such as the C540-4G and the S345-4G. It cannot power an 802.3at PoE camera like the C540 directly. Send us your camera list and we will size it properly.
In the box
- ✓ 60W solar panel
- ✓ Lithium battery unit
- ✓ DC output cables
- ✓ Mounting hardware for panel and battery
Not included
Listed here so it does not appear as an extra cost later.
- ✕ Camera
- ✕ Pole or mast
- ✕ Site survey for sun exposure
- ✕ Professional installation
Compatibility
Powers VIGI 4G cameras such as the C540-4G and S345-4G. Sized for one camera per unit. Needs a mounting position with several hours of direct sun and no shading from trees or buildings.
